Solar Panel Module Environmental Walk-in Chamber for testing PV
Module's Resistance of Nature Weather
Solar Panel Test Chamber also called PV Module Testing Equipment,
for they are used for testing solar panel's resistance of nature
weather. Solar Panel is exposed into nature, so a test chamber is
needed to test its performance.
Applicable to environmental adaptability and reliability test in
such industrial units as electronics, electrical appliance,
battery, plastics, food, paper product, vehicle, metal, chemistry,
building material, research institution, inspection and quarantine
bureau, university, etc.
● GB-2423．1-2008(IEC68-2-2) Test B: High Temperature Test
● GB-2423．1-2008(IEC68-2-2) Test B: Low Temperature Test
● GJB360．8-2009(MIL-STD．202F) High Temperature Operating Life Test
● GBJl50．3-2009(MIL-STD-810D) High Temperature Test
● GBJl50．4-2009(MIL-STD-810D) High Temperature Test
|Specification of Walk-In Chambers|
|Safety Devices(standard)||No fuse breaker, overpressure,overheat and over current protection
for compressor,over-temperature protection, overload protection for
the blower, dry heat protection|
|Standard accessories||Sight window*1,cable port(portΦ50mm)*1,chamber lamp*1, status
|Control System||Balanced Temperature & Humidity Control System|
|Refrigeration system||Water Cooled|
|Semi-hermetic compressor, single-stage or cascade refrigeration
|CFC free refrigerant(HFC-507 and HFC-23)|
|Controller||Panel||7-inch LCD Touch panel, Chinese or English display selectable|
|Operation model||Program or fixpoint running|
|Memory capacity||120 programs,1200steps, all repeat 999 cycles,part repeat 99 cycles|
|Accuracy||Temp.:0.1% of F.S±1 digit Humidity:0.1% of F.S±1 digit|
|Input||Temp.:pt-100, Humidity:pt-100 or ～5V DCV|
|Comm.port||RS-232 or RS-485 (Software is an option)|
|Temp. range||Maximum:80 ºC,120 ºC；Minimum:-60 ºC,-50 ºC,-40 ºC,-30 ºC,-20 ºC,-10
|Temp. constancy||±0.5 ºC|
|Temp. uniformity||±2.0 ºC|
|Ambient Temp.||+5 ºC～+35 ºC|
|Wiring method||AC 380±10％ 50Hz,3 phase 4 wires +Ground Wires|
|Heat uptime||+20 ºC～+80 ºC, Within 60 min|
|Pull downtime||+20 ºC～-55 ºC, -40 ºC,-20 ºC,-10 ºC,Within 120 or 90 or 60 min|
|Interior material||Stainless Steel Plate(SUS 304)|
|Exterior material||Baked Painting Steel Or Stainless steel(SUS304)|
|Insulation material||Rigid polyurethane foam|
|Door size (mm)||Single wing: W800*H1800； Double wing:W1600*H1800；|
|Note:1. We reserve the right to change specifications without prior
notice 2.Customized sizes and configurations available|
1) Stainless steel interior
2) Painted galvanized steel exterior for long life
3) MAP service doors are hinged (no tools or lifting)
4) Easy access to frequently checked refrigeration components
5) Reliable steam generator system for humidity applications
6) Adjustable vanes in supply grille allow directing of airflow as
About Solar Panel Test Chamber
Alternative energy sources are the future of the world we live in.
Solar energy is one of the forerunners of this energy revolution.
The panels need to be able to withstand whatever mother nature
throws at them. For this reason, environmental testing has become
an integral step in product development and design.
Solar panel refers either to a solar hot water panel, a common type
of a solar thermal collector or to one or more solar photovoltaics
(PV) modules, electrically connected and mounted on a supporting
Solar modules must withstand rain, hail, heavy snow load, and
cycles of heat and cold for many years. Many crystalline silicon
module manufacturers offer a warranty that guarantees electrical
production for 10 years at 90% of rated power output and 25 years
Most popular walk-in type
- Standard sub-assemblies for quick delivery and low cost
- High-quality panels manufactured to KOMEG standards.
- Standard multi-layer heated window in door(s)
- Operation allowable to 120°C(75°C in humidity mode )
- Temperature change rates to 10°C/m.
1, Pre-sales service
Before the purchase, our company will provide customers with
detailed product-related information, and welcome you to visit the
company and check the goods.
2, After-sales service
After the completion of the transaction, our company will be
arranged different after-sales service according to the ease of the
goods, and even arrange work engineers on-site service.
3, the Warranty period
Our product warranty is 12 months and we are committed to
responding within 48 hours of the problem, providing a solution.
Flexibility for structure
The panels used in our chamber are 4” (100mm or 150mm) Thick
urethane-foam sandwiched between a stainless-steel interior wall
and a coated-steel exterior. An assembled box is self-supporting.
So that no heavy structural members are required. Different door
sizes, flooring upgrades, access ports, and other modifications are